# PPE Levels A, B, C and D Explained (EPA and OSHA HAZWOPER) HAZWOPER guide · 2 min read · Updated 2026-11-03 HAZWOPER sorts chemical protective ensembles into four levels, A through D, described in OSHA 29 CFR 1910.120 Appendix B and in EPA guidance. The level is chosen from the known or suspected hazard, the routes of exposure and how much is known about the chemicals involved. ## Level A: highest respiratory, skin and eye protection **Use when:** the substance requires the highest level of protection for skin, eyes and lungs. That means high concentrations of vapors, gases or particulates that are toxic through the skin, unknown substances in a confined or poorly ventilated area, or operations with a high chance of splash, immersion or contact with skin-toxic chemicals. - Positive-pressure, full-facepiece self-contained breathing apparatus (SCBA), or a positive-pressure supplied-air respirator with escape SCBA - **Totally encapsulating, vapor-tight** chemical-protective suit - Inner and outer chemical-resistant gloves - Chemical-resistant boots with steel toe and shank - Two-way radio communications; optional cooling unit, hard hat and coveralls under the suit ## Level B: highest respiratory, lesser skin protection **Use when:** the highest level of respiratory protection is needed but less skin protection, for example oxygen-deficient atmospheres (below 19.5%), IDLH concentrations, or substances that aren't a significant skin hazard. Level B is the minimum level recommended for initial site entry until hazards are identified. - Positive-pressure, full-facepiece SCBA or supplied-air respirator with escape SCBA - Hooded chemical-resistant clothing (splash suit, coveralls or one- or two-piece suit). Not vapor-tight - Inner and outer chemical-resistant gloves and chemical-resistant boots ## Level C: air-purifying respirator **Use when:** the type and concentration of airborne substances are known, the criteria for using air-purifying respirators are met, and skin contact isn't expected to cause harm. Oxygen must be at least 19.5%, the contaminant must have adequate warning properties or an end-of-service-life indicator, and concentrations must be below IDLH and within the respirator's protection factor. - Full-face or half-mask air-purifying respirator (APR) with the correct cartridges, or a powered air-purifying respirator (PAPR) - Hooded chemical-resistant clothing - Inner and outer chemical-resistant gloves and boots ## Level D: work uniform **Use when:** the atmosphere contains no known hazard and work rules out splashes, immersion or unexpected inhalation or contact. Level D is for nuisance contamination only and gives **no respiratory protection**. - Coveralls - Safety boots or shoes, safety glasses or chemical splash goggles, hard hat - Gloves and face shield as needed ## Comparison table | Level | Respiratory | Skin | Typical situation | | --- | --- | --- | --- | | A | SCBA or SAR with escape | Vapor-tight, fully encapsulating suit | Unknowns, high vapor concentrations, skin-absorbable toxics | | B | SCBA or SAR with escape | Splash-protective, hooded | Initial entry, O2 < 19.5%, IDLH air, low skin hazard | | C | Air-purifying respirator | Splash-protective, hooded | Known contaminant, measured concentrations, APR criteria met | | D | None | Work uniform | No atmospheric hazard, nuisance contamination only | ## Changing levels during work The level isn't fixed for the whole job. [Air monitoring](https://www.hazwoperosha.com/guides/air-monitoring/) results, new information from site characterization, or a change in tasks can raise or lower it. The site safety and health plan should set action levels that trigger an upgrade or withdrawal. Every level also needs a matching [decontamination line](https://www.hazwoperosha.com/guides/hazwoper-decontamination/). ## Heat stress and PPE Higher levels of protection trap body heat. Workers in Level A and B face serious heat stress risk, so the plan should include work-rest cycles, fluids, monitoring of heart rate or body temperature, and cooling vests where needed. ## Frequently asked questions ### What is the difference between Level A and Level B PPE? Both use SCBA or supplied air for maximum respiratory protection. Level A adds a totally encapsulating, vapor-tight suit for maximum skin protection. Level B uses non-vapor-tight, splash-protective clothing. ### When can Level C be used? Level C can be used when the airborne contaminants and their concentrations are known, oxygen is at least 19.5%, concentrations are below IDLH, air-purifying respirator criteria are met, and skin contact is not expected to cause harm. ### Does Level D include a respirator? No. Level D is a work uniform with no respiratory protection and is only for situations with no known atmospheric hazard. This guide summarizes federal OSHA, Cal/OSHA and EPA rules for training purposes. It is not legal advice. Always check the current regulation text and your site safety and health plan. ## Get trained [HAZWOPER Micro-Module: PPE Levels A, B, C & D Explained](https://www.hazwoperosha.com/courses/hazwoper-micro-module-ppe-levels-a-b-c-and-d-explained/) 15 Min · **$12.99** [OSHA 40 Hour HAZWOPER Training](https://www.hazwoperosha.com/courses/osha-40-hour-hazwoper-training/) 40 Hours · **$249.99** [OSHA 24 Hour HAZWOPER Training](https://www.hazwoperosha.com/courses/osha-24-hour-hazwoper-training/) 24 Hours · **$169.99** ## Test yourself 10 free questions with answers. [PPE levels quiz](https://www.hazwoperosha.com/quizzes/ppe-levels-quiz/) ## More HAZWOPER guides - [What Is HAZWOPER? The Complete Guide to OSHA 29 CFR 1910.120](https://www.hazwoperosha.com/guides/what-is-hazwoper/) · Guide · 4 min read - What HAZWOPER means, who it covers, the 40, 24 and 8 hour training levels, emergency response, medical surveillance and how to get... - [40 vs 24 vs 8 Hour HAZWOPER: Which Training Do You Need?](https://www.hazwoperosha.com/guides/which-hazwoper-course-do-i-need/) · Guide · 2 min read - Compare 40 hour, 24 hour and 8 hour HAZWOPER training. Who needs each level under OSHA 1910.120(e), field experience rules, supervisor... - [HAZWOPER 8 Hour Refresher Requirements: Deadlines, Lapses and Records](https://www.hazwoperosha.com/guides/hazwoper-refresher-requirements/) · Guide · 2 min read - OSHA requires 8 hours of HAZWOPER refresher training every year under 1910.120(e)(8). When it is due, what happens if it lapses, what it... - [How to Get HAZWOPER Certified Online (and How Long It Lasts)](https://www.hazwoperosha.com/guides/hazwoper-certification/) · Guide · 2 min read - Step-by-step guide to HAZWOPER certification: choosing a level, online training, field experience, certificates and wallet cards, how long... - [HAZWOPER Decontamination Procedures: Decon Line Setup and Steps](https://www.hazwoperosha.com/guides/hazwoper-decontamination/) · Guide · 2 min read - How HAZWOPER decontamination works under 1910.120(k): decon methods, setting up the contamination reduction corridor, typical decon line... - [Site Control and Work Zones: Exclusion, Contamination Reduction and Support Zones](https://www.hazwoperosha.com/guides/site-control-work-zones/) · Guide · 2 min read - HAZWOPER site control under 1910.120(d): the site control program, hot, warm and cold work zones, the buddy system, access control points... --- Page: https://www.hazwoperosha.com/guides/ppe-levels-a-b-c-d/ HazwoperOSHA.com: [Home](https://www.hazwoperosha.com/) · [Courses](https://www.hazwoperosha.com/#courses) · [About](https://www.hazwoperosha.com/about/) · [Contact](https://www.hazwoperosha.com/contact/) · [Privacy](https://www.hazwoperosha.com/privacy/) · [llms.txt](https://www.hazwoperosha.com/llms.txt) · [Sitemap](https://www.hazwoperosha.com/sitemap.xml) Questions: +1-866-429-6742 · sales@hazwoper-osha.com